Home  >  Products   >  Fire Alarm Power Supplies and Communicators

Fire Alarm Power Supplies and Communicators

Honeywell’s IPGSM-4G is an IP and fire alarm communicator that offers contact ID reporting with any Fire Alarm Control Panel (FACP) that has a built-in dialer. This easy to install, dual path communicator connects directly to the primary and secondary communication ports of a Fire panel's Digital Alarm Communicator Transmitter (DACT). It offers three selectable reporting paths which include Cellular only, IP only, or IP primary/cellular backup.

  • Saves the cost of two dedicated phone lines.
  • Dual path communications. Can communicate to central station using Internet or cellular technology.
  • Requires no change to the existing Fire Alarm Control Panel configuration. The IPGSM-4G connects directly to the primary and secondary telephone ports.
  • Operates over the following communication protocols: HSPA+ (4G), HSPA (HSDPA & HSUPA) (3G), EDGE (2G) and GPRS (2G).
  • Works over any type of customer provided Ethernet 10/100
  • Base network connection (LAN or WAN), DSL modem or cable modem.
  • Data transmits over standard contact-ID protocol but is secured with the industry's advanced encryption standard (AES 256 bit).
  • Built-In Power Supply module: On board charging circuit design accommodates back-up battery.
  • Includes primary power and battery supervision.
  • Diagnostic LEDs: Signal strength and status indicators to simplify troubleshooting.

  • GSM-ANT3DB  3db Gain External /Remote Antenna
  • 7626-50HC 50 ft. Antenna Cable
  • 7626-25HC 25 ft. Antenna Cable
  • WA7626-CA  SNA to N Adapter
  • 7720P Handheld Programmer
  • HPTCOVER  Plug-in Transformer Box

IPGSM-4G Firmware Upgrade Instructions - 62KB

IPGSM-4G V3.0.7 Firmware Upgrade Kit - 4.78M

IPGSM-4G Datasheet
IPGSM-4G Installation Guide
IPGSM-4G Sell Sheet
NFPA 72 2013 Compliance

IPGSM-4G Engineering Specifications - 88KB

Installation Documents
7720P Users Guide - 97KB
Honeywell Technical Bulletin - HPPTB1203-1 - 51KB
IPGSM-4G Inspection & Testing Document - 158KB
IPGSM-4G Installation Guide - 1MB
NFPA 72 2013 Compliance - 357KB

FDNY Listing - 70KB
IPGSM-4G 1645:0199 - 166KB
UL Certificate of Compliance - 332KB
UL Listing - 23KB


Sell Sheets
IPGSM-4G Sell Sheet - 234KB