Home  >  Products   >  HWF2A-COM / HWF2V-COM LTE Fire Communicators

HWF2A-COM / HWF2V-COM LTE Fire Communicators

Honeywell's HWF2-COM Series LTE / IP fire communicators are single or dual path commercial fire alarm communicators that offer contact ID reporting with any fire alarm control panel (FACP) with a built in dialer. These easy to install communicators offer three selectable reporting paths which include LTE Cellular only, IP only, or IP primary/LTE cellular backup.

  • AT&T (HWF2A-COM) and Verizon Wireless (HWF2V-COM) models available
  • Dual path communications to central station using Internet or LTE cellular technology
  • Requires no change to the existing Fire Alarm Control Panel configuration with connection to primary and secondary telephone ports
  • Works on Ethernet 10/100 ports
  • Base network connection (LAN or WAN), DSL or cable modem
  • Eliminates the cost of two dedicated phone lines
  • Data transmits over standard contact-ID protocol but is secured with the industry's advanced encryption standard (AES 256 bit)
  • Includes primary power and battery supervision
  • Built-In Power Supply module: On board charging circuit design accommodates back-up battery
  • Diagnostic LEDs: Signal strength and status indicators to simplify troubleshooting
  • UL864 10th Edition listed

  • CELL-ANT3DB 3dBA Gain External / Remote Antenna
  • 7626-50HC 50 ft. Antenna Cable
  • WA7626-CA SMA to N Adapter
  • 7720P Handheld Programmer
  • HPTCOVER Plug-in Transformer Box
  • BAT-1270: Battery 12 Volts, 7 AH sealed
  • Note: The CELL-ANT3DB and the WA7626-CA are both required for installing an external antenna along with the 7626-50HC 50 ft antenna cable.

HWF2-COM Series Data Sheet
HWF2-COM Series Installation Guide
HWF2-COM Series FDNY Application Note
HWF2-COM Series Inspection and Testing

HWF2-COM Series Drawings