Home  >  Products   >  Fire Alarm Power Supplies and Communicators

Fire Alarm Power Supplies and Communicators


HPFF8 (CM) (E)

The Honeywell HPFF8 and HPFF8CM are Notification Appliance Circuit (NAC) Expander Power Supplies designed to extend the power capabilities of existing NACs and provide power for auxiliary devices. The HPFF8 and HPFF8CM connects to any 12 or 24V Fire Alarm Control Panel (FACP) or stand alone.

Data Sheet - (448 KB PDF)
Manual - (464 KB PDF)
Mounting Dimensions
Application Note (PDF)
HPFF8 Drawing - ( PDF)
HPFF8 Drawing - (DWG)
HPFF8 Drawing - (DXF)
HPFF8CM Drawing - (PDF)
HPFF8CM Drawing - (DWG)
HPFF8CM Drawing - (DXF)
Class A adapter manual (PDF)
 
 
 
Specifications
Primary Input Power: 120VAC, 60Hz, 3.6A standard;
240VAC, 50Hz, 1.5A on units with E suffix.
Secondary Power: 24 volt operation: two 7-24 AH batteries.
Battery Charging Capacity: Up to 26 AH batteries.
HPFF8 Cabinet: Holds up to two 18AH batteries.
HPFF8CM: Holds up to two 12AH batteries.
Total Output Current: 8.0A max.
Standby Current: 0.075 A.
Auxiliary Power Output: 2.0A under all conditions.
NAC Output Ratings: 24VDC fully regulated, 3.0A max per circuit (8.0A total).
End-of-Line Resistor Range: 1.9K to 25k ohm, ½ watt.
Common Trouble: 2.0A at 30VDC.
Relay Fail Relay: 2.0A at 30VDC.
Input Control Circuits: compatible with 12 and 24 VDC control panel NACs.
Input Control Current (alarm): 5.68 mA @ 12 VDC, 12.28 mA @ 24 VDC.
Temperature Rating: 32°F to 120°F (0°C to 49°C).
Relative Humidity: 10% to 93% non-condensing.
Cabinet Dimensions:
• HPFF8 Cabinet: 16.65" W x 19.0" H x 5.2" D (42.29 W x
48.26 H 13.23 D cm)

 


 

The Honeywell Corporation
HPF602ULADA
HPF902ULADA

HPFS246

HPFS248

 

Where to Purchase Our Products

Find a local sales office or convenient distributor near you.